Knowledge Base Andatech Support Portal Air Purifiers Ionmax ION401 Ionic Air Purifier

            Cleaning light switched on (even after cleaning)

            Possible Cause :

            Too much dust has accumulated on the collection blades or ionising wire

            Solution 1:

            Turn off the unit, unplug and clean the collection blades and ionizing wire thoroughly. Clean the wires with rubbing alcohol.

            Solution 2:

            Clean the ionising wires:
            Each strand of ionising wire is equipped with a dust removal mechanism and must be
            cleaned once a week, or when the unit is producing excessive noise.

            1. Lift the "cleaning rod"
            2. Pull the "cleaning rod" up and push it down several times to remove the dust on the
            Ionising Wires.
            3. Return the "cleaning rod" to its original position by lightly pushing it into place.

            Possible Cause #2:

            Collection blades are jarred or removed suddenly

            Solution 1:

            Remove and re-insert collection blades and press "on" button to reset

            Updated: 01 Apr 2019 02:36 PM
            Help us to make this article better
            0 0