ANDATECH SENTRY
Baton Breathalyser
Software Installation Guide
1. Download and install software
Download the latest software version from the product page here - https://www.andatech.com.au/andatech-sentry
Install following the steps below
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13. 
The software shortcuts will be created on your desktop.
At this stage you can simply right click on the software and select run as administrator and open it.
Once the software is running, connect the device with the micro USB cable provided, to the computer then turn on the unit and you can see the unit will show "USB" and click on connect:
Once the unit is connected, the message on the unit will change to "PC".
Then click on "result" and after that click on "read":
You should be able to see all of the test result:
You can use the filter function and extract the data you want to filter and save the files as excel files (.xls).
Note - if your PC is operating on Vista or Windows 7, please continue with the directions below. If not, you can skip to the next section on driver installation.
1.
2. 
3. 
4.
2. Install the driver
Connect the Sentry to the PC using the provided USB cable
Switch on the Sentry (press the power button)
Screen will display “USb” when successfully connected
Method 1 - Search automatically for the driver
1. 
2. 
3. 
4. 
5. 
6. 
7. 
Method 2 - Manually search for the driver
1.
2.
3.
4.
5.
6.
