MedSense TF01 Infrared Forehead Thermometer
The device can store 9 readings in memory. To recall temperature values from memory, press the “MEM” button while the device is switched off. The result w...
Wed, 21 Jul, 2021 at 5:54 PM
Possible Cause #1: The battery power is too low Solution: Replace with new alkaline batteries Possible Cause #2: The batteries were inserted incorrectl...
Wed, 21 Jul, 2021 at 5:53 PM
If you are getting the "HI" error message on your thermometer, it means that the target object temperature is higher than the thermometer's m...
Wed, 21 Jul, 2021 at 5:52 PM
These two error messages relate to the ambient temperature of the environment that the thermometer is being used in.
The error message &...
Wed, 21 Jul, 2021 at 5:52 PM
Possible Cause #1:
Measurement position is not correct
Solution:
Follow the user manual instructions when taking a measurement (3-5cm distance...
Wed, 21 Jul, 2021 at 5:51 PM
By default, the device will “beep” to indicate when a measurement is complete or when there is an error. To enable or disable this sound, press the “MEM”...
Wed, 21 Jul, 2021 at 5:51 PM
It is recommended to clean the device before and/or after each use to ensure precise measurements. Check the infrared sensor glass before each use....
Wed, 21 Jul, 2021 at 5:50 PM
The thermometer will display the "Err" message if the environment temperature changed too rapidly at more than 5°C during object temperatu...
Wed, 21 Jul, 2021 at 5:50 PM
Consecutive tests showing large temperature fluctuations or inconsistent readings.
If this is happening, the time interval between measurem...
Wed, 21 Jul, 2021 at 5:49 PM