Breathalyser Error Messages
The unit is in Fast Mode. Press and hold the button to switch to Normal mode. NOTE: Fast mode is a quick test to detec...
Wed, 21 Jul, 2021 at 5:40 PM
This error message shows when not enough air flow is filtered through the breathalyser.
Use a long, steady breath starting from the first beep an...
Mon, 14 Jun, 2021 at 6:14 PM
OL stands for "over the limit". The detected reading is over the reading range of your breathalyser. This message does not indica...
Wed, 21 Jul, 2021 at 5:40 PM
Possible Cause 1: The unit needs to be re-calibrated. If you have had the breathalyser for more than 6 months and / or have used it 200-5...
Wed, 21 Jul, 2021 at 5:40 PM
This indicates that the device is locked up due to a software, battery or calibration issue. This can be solved by sending your device in for cali...
Wed, 21 Jul, 2021 at 5:40 PM
This error message shows when the breathalyser's sensor is faulty. This typically can be solved with a simple calibration.
Wed, 21 Jul, 2021 at 5:39 PM
The unit is due for calibration. Book your unit for calibration through your account on https://andatech.caltrace.com
Wed, 21 Jul, 2021 at 5:39 PM
The unit is in Normal Mode Press and hold the button if you'd like to switch to Fast mode. NOTE: Normai mode is the standard test where it pro...
Fri, 18 Jun, 2021 at 1:01 PM
If ERR9 shows on your screen, it is an indication that weak batteries have been in the unit for too long. First, try to replace your batteries with b...
Mon, 4 Mar, 2024 at 11:05 AM
This error message shows commonly due to low charge in your batteries. Replace with a new set of Alkaline or Lithium batteries. They must be non-heav...
Mon, 4 Mar, 2024 at 10:32 AM