Here are the steps to insert the SIM card into the Andatech Prodigy 3 Lite Portable Breathalyser:
1.Power off the device
Ensure the Prodigy 3 Lite is switched off before inserting the SIM card.
2. Locate the SIM card slot
The SIM card slot is located inside the device, usually behind the back cover.
3. Remove the back Cover/Battery Cover
Carefully open or remove the back cover using your fingers (do not force it).
Then remove the Prodigy 3 battery from the unit. You'll notice the silver SIM tray holder has directional indicators for opening and closing.
4. Insert the SIM card
Insert a standard SIM card into the slot with the gold contacts facing down and the notched corner aligned correctly.
Gently slide the SIM in until it is fully seated.
5. Reattach the back cover
Secure the back cover back into place.
6. Power on the device
Turn the unit on and allow it to boot up.
The device should automatically detect the SIM card.
Notes:
Ensure the SIM card is activated and has data enabled.
The device typically supports 2G/3G networks (check carrier compatibility).
Avoid inserting or removing the SIM while the device is powered on..
Please follow this VIDEO
If the SIM is not detected after insertion, please contact support@andatech.com.au for further assistance.