Yes. The Ionmax ION610 supports continuous drainage using the supplied drain hose.
Simply connect the hose to the continuous drain outlet and ensure it slopes downward without any kinks or bends.
1. You may use a hose with an inner diameter of 12mm for continuous drainage:
2. Use a screwdriver to remove the knockout at the back. Attach the hose to the connector through the hole.
3. The hose must lead to an appropriate drain at a downward slope with no sharp bends.
This allows the collected water to drain automatically, eliminating the need to empty the water tank manually.
If continuous drainage is not used, the unit will stop automatically when the water tank becomes full.
Ensure the water tank is fully installed in position before inserting the hose.
Before removing the water tank, ensure that the hose is disconnected.
Should you need further assistance please contact us at support@andatech.com.au