AlcoSense Pro

How to correctly blow into the Alcosense Pro?
Blow in a long, steady breath until the device beeps twice. This can take 5-6 seconds. You will hear a long beep while you are blowing - the reading will...
Wed, 7 Jul, 2021 at 3:54 PM
How to remove and replace Alcosense Pro battery cover?
The battery cover is located at the base or the bottom of the unit
Wed, 7 Jul, 2021 at 3:51 PM
How to change between fast and normal testing mode on the Alcosense Pro?
There are two modes with the Alcosense Pro Normal mode (nor) - provides you with a BAC% reading e.g. 0.04%  Fast mode (FSR) - a quick test to show wheth...
Wed, 7 Jul, 2021 at 3:53 PM
How to check number of test have been conducted on the Alcosense Pro?
While the unit is switch off, hold down the power button The screen will come on and you should see the screen flicker between 3 options One of...
Wed, 7 Jul, 2021 at 3:49 PM
Warning light appears during testing on Alcosense Pro
This indicates that alcohol has been detected. Readings starting from 0.02% and above will result with a solid, warning light. 
Wed, 7 Jul, 2021 at 3:49 PM
LED lights on Alcosense Pro are blinking but unit won't turn on
Batteries that are low on charge or flat that have been left in the device for too long may cause the device to go into "locked" mode. If th...
Wed, 7 Jul, 2021 at 3:48 PM